Spray

GREY PRIMER FILLER 400 ML

S-32400

  • startinf from
  • 17.00€
  • 6.00€


1K LIGHT GREY PRIMER FILLER, very useful for quick repairs and small tweaks. Allows the application of several layers without dripping. Adhesion on putty, electro-galvanized sheets, primers and old paint. Suitable for paints used in the automotive and industrial vehicle sectors.
6.00€
In stock

  • Share this product:
  • Back

Technical sheet

Features:
Drying very fast. Ease of application and repainting. Good adhesion. It does not contain lead. Repainting very fast.
Preparation before painting:
Clean and degrease the surface.
Instructions for use:
Shake the spray very well before using, approximately one minute after hearing the noise from the mixer. For best results, apply in thin layers at a distance of 25 cm (three thin layers are always better than a thick one). Repaintable in ten minutes with the same paint. After use, invert the spray to purge the valve. If the diffuser gets stuck, replace it with one again.
Warnings:
Do not apply on connected equipment and use in well ventilated areas.

 


Contact us for more information

*
*
*
*
*
*
Enter security code
 Security code